Jump to content


Photo

[EMULATOR] No$gba v2.6a User's Guide and FAQ

Started by Kiririn-shi, Oct 21 2006 05:54 AM

  • Please log in to reply
3504 replies to this topic

#301 Guest_nndl666

Guest_nndl666
  • Guest
Offline

Posted 08 April 2007 - 10:37 PM

did u rename NO$GBA.INP to firmware.bin?Why cant i get past the first fight? the game freezes once i beat the first fightbtw skill1414 how did u get it to run s a manageable speed im running it at like 30% after i leave the house its so slow!!

Edited by nndl666, 08 April 2007 - 10:41 PM.

  • 0

#302 Guest_Jbwoy4life

Guest_Jbwoy4life
  • Guest
Offline

Posted 08 April 2007 - 11:53 PM

Maybe its your computer i got everything to work perfectly speed and saveing and its running at 75% for me
  • 0

#303 Guest_nndl666

Guest_nndl666
  • Guest
Offline

Posted 09 April 2007 - 12:37 AM

yeah my pkm p runs at about 30% so maybe its the comp... as for pkm ranger? i get a black screen when i load and then the emu enlarges and i get errored out.. not responding and crud
  • 0

#304 Guest_Skill1414

Guest_Skill1414
  • Guest
Offline

Posted 09 April 2007 - 01:36 AM

yeah my pkm p runs at about 30% so maybe its the comp... as for pkm ranger? i get a black screen when i load and then the emu enlarges and i get errored out.. not responding and crud

are you using no$gba 2.4a? Because speed is improved a lot from 2.4.
  • 0

#305 Guest_heckyes7666

Guest_heckyes7666
  • Guest
Offline

Posted 09 April 2007 - 01:38 AM

i would just like to thank bahamut for this because i could not figure out how to work Pheonix Wright at all
  • 0

#306 Guest_nndl666

Guest_nndl666
  • Guest
Offline

Posted 09 April 2007 - 02:19 AM

yeah skill 1414 i just dled the newest ver of no$gba todayit might be because ive got a cruddy windows 2000 pc from dell
  • 0

#307 Guest_Destiny's Grasp

Guest_Destiny's Grasp
  • Guest
Offline

Posted 09 April 2007 - 03:56 PM

Is there any save states that work with Pearl? It works completely fine on mine, it's just I have to keep starting over and over. Plus, I saved it n game, but I can't load that, ether.
  • 0

#308 Guest_Jbwoy4life

Guest_Jbwoy4life
  • Guest
Offline

Posted 09 April 2007 - 06:55 PM

Is there any save states that work with Pearl? It works completely fine on mine, it's just I have to keep starting over and over. Plus, I saved it n game, but I can't load that, ether.

http://www.dgemu.com...w...3753&st=285 its explained how to save a few pages back in this topic and it works for me.in Phoenix wright I'm stuck on this part were it requires us to Blow to clear away the dust and this is emulated so how can we do that? i guess some games wont be playable if we cant do that like spectrobes
  • 0

#309 Guest_Destiny's Grasp

Guest_Destiny's Grasp
  • Guest
Offline

Posted 09 April 2007 - 07:44 PM

Saving and loading in Pokemon diamond works!Follow these instructions:1. Delete the current firmware file you have.2. Rename the file NO$GBA.INP to firmware.bin3. change your setup to this and save options. Reduced: 99% of original size [ 401 x 459 ] - Click to view full image4. play pokemon diamond and save it ingame.5. Close the game and then open it again and it should be able to load That doesn't work for PearlEdit: Never Mind. It does. Thanks!

Edited by Destiny's Grasp, 09 April 2007 - 07:50 PM.

  • 0

#310 Guest_Tool17

Guest_Tool17
  • Guest
Offline

Posted 09 April 2007 - 08:46 PM

Saving and loading in Pokemon diamond works!Follow these instructions:1. Delete the current firmware file you have.2. Rename the file NO$GBA.INP to firmware.bin3. change your setup to this and save options. Reduced: 99% of original size [ 401 x 459 ] - Click to view full image4. play pokemon diamond and save it ingame.5. Close the game and then open it again and it should be able to load That doesn't work for PearlEdit: Never Mind. It does. Thanks!

Why is everyone making it so difficult?All you have to do in 2.4 to save in pokemon d/p is go to options\emulator setup and change the save type to flash256k and reset the cartridge then it saves and you can continue the game.

Edited by Tool17, 09 April 2007 - 08:50 PM.

  • 0

#311 Guest_Protoavis

Guest_Protoavis
  • Guest
Offline

Posted 09 April 2007 - 10:47 PM

Why is everyone making it so difficult?All you have to do in 2.4 to save in pokemon d/p is go to options\emulator setup and change the save type to flash256k and reset the cartridge then it saves and you can continue the game.

because people are using 2.4a maybe? When trying to load a save file (before the whole changing tha file to firmware stuff) it resulted in black screens. You could save the game but couldn't load it. For some strange reason it might not have been affecting you but it was affecting most everyone else.
  • 0

#312 Guest_nndl666

Guest_nndl666
  • Guest
Offline

Posted 10 April 2007 - 12:04 AM

no,no you save INGAME forget the whole load script and write script, emu save f7 and f8 doesnt work
  • 0

#313 Guest_Jbwoy4life

Guest_Jbwoy4life
  • Guest
Offline

Posted 10 April 2007 - 02:31 AM

Is anyone else unable to save in Phoenix Wright Justice for all? it says saving failed saving works in the first one

Edited by Jbwoy4life, 10 April 2007 - 02:32 AM.

  • 0

#314 Guest_nndl666

Guest_nndl666
  • Guest
Offline

Posted 10 April 2007 - 03:14 AM

hmm i get the same error, but my pal apparently has no problems...
  • 0

#315 Guest_Destiny's Grasp

Guest_Destiny's Grasp
  • Guest
Offline

Posted 10 April 2007 - 03:37 PM

Never mind again. yes, it did save but when I load it, the screens stay black.
  • 0

#316 Guest_cydria

Guest_cydria
  • Guest
Offline

Posted 11 April 2007 - 05:08 PM

How i get the $gba thing?
  • 0

#317 Guest_crimsel

Guest_crimsel
  • Guest
Offline

Posted 11 April 2007 - 05:19 PM

How i get the $gba thing?

you can get the no$gba emulator at the very first post of this thread. if you still can't get it. try using the a search engine like yahoo or google and type in no$gba v2.4a. then you should be able to download the emulator. i hope that's what you're asking for.
  • 0

#318 Guest_baddi

Guest_baddi
  • Guest
Offline

Posted 11 April 2007 - 05:54 PM

Does anybody know how i can save my gameprocess with no$gba?For example if i try to save Digimon World, the emulator crashes and i have to begin from the start again.
  • 0

#319 Guest_jzt451

Guest_jzt451
  • Guest
Offline

Posted 11 April 2007 - 05:57 PM

Just go to the website http://nocash.emubase.de/gba.htm & get the latest update.
  • 0

#320 Guest_Sildra

Guest_Sildra
  • Guest
Offline

Posted 12 April 2007 - 05:37 AM

Been trying Touch Detective for a while now. It works with any Backup Media (best with EEPROM 8k bytes) The intro loads perfectly quickly, but the game itself runs INCREDIBLY slowly.
  • 0

#321 Guest_destinyisathand

Guest_destinyisathand
  • Guest
Offline

Posted 12 April 2007 - 07:40 PM

Does anybody know how i can save my gameprocess with no$gba?For example if i try to save Digimon World, the emulator crashes and i have to begin from the start again.

You're probably using the wrong save setting. You should be using one of the EPPROM options. I have mine set to EPPROM 64kb and ingame saving works fine. For the record, save states still don't work, if that's what you're doing.
  • 0

#322 Guest_Vaan_IS_Tidus

Guest_Vaan_IS_Tidus
  • Guest
Offline

Posted 12 April 2007 - 07:59 PM

does anyone know how to save Digimon world ds on the no$gba? I can't get it to save and I got a MagnaAngemon and a RiseGreymon today :)
  • 0

#323 Guest_Extremer-ps

Guest_Extremer-ps
  • Guest
Offline

Posted 12 April 2007 - 09:53 PM

Pokemo Pearl game packs up before Mukkuru's fainting in a first battle (after starter receiving).Posted ImageI'm usingPosted ImageDo you know what happens?(I know that my english sucks. Can you understand me?)

Edited by Extremer-ps, 13 April 2007 - 06:43 PM.

  • 0

#324 Guest_baddi

Guest_baddi
  • Guest
Offline

Posted 13 April 2007 - 12:38 AM

You're probably using the wrong save setting. You should be using one of the EPPROM options. I have mine set to EPPROM 64kb and ingame saving works fine. For the record, save states still don't work, if that's what you're doing.

But if i use those setting, i cant play Diamond respectively Pearl.Only with Flash256 this games can be ran, so i cant use yours.Consequently i try to get a savegame by using the setting, which is seen in the picture below my post.Posted Image
  • 0

#325 Guest_Protoavis

Guest_Protoavis
  • Guest
Offline

Posted 13 April 2007 - 08:29 AM

But if i use those setting, i cant play Diamond respectively Pearl.Only with Flash256 this games can be ran, so i cant use yours.Consequently i try to get a savegame by using the setting, which is seen in the picture below my post.---

Ermm well that's kind of obvious, different roms require different settings to play properly. Digimon games and Pokemon games do not use the same save type.

Edited by Protoavis, 13 April 2007 - 08:29 AM.

  • 0
Back to DS / 3DS Resources


  1. DGEmu.com
  2. → Console Emulation & Modding Assistance
  3. → Nintendo
  4. → DS / 3DS Resources
  5. Privacy Policy
  6. Forum Rules ·