They mean that you enlarge the size of your playing screen on the monitor, you do this by going up in the north-east (top right) corner of the screen and click on the middle button, and it should enlarge...But I haven't had any problems with inverted colors so I don't know how well it would work, I know this because it said in the FAQ of the guide that it was unconfirmed...Good luck though! (By the way that was not a silly question^_^)Yes,to the problem of the inverted colors,how do they mean,simply maximizing?(Excuse my stupiditieness-ness)
[EMULATOR] DeSmuME User's Guide and FAQ
Started by phoenix121, May 13 2006 10:16 PM
573 replies to this topic
#351
Guest_TwilightKyubimon
Guest_TwilightKyubimon
-
- Guest
Posted 06 August 2007 - 10:24 PM
#352
Guest_jesashika
Guest_jesashika
-
- Guest
Posted 08 August 2007 - 02:48 AM
i tried downloading the emulator from where it sais in step 1 but it doesnt open at all...so you know anywhere else i can download it from?
#353
phoenix121
-
- Dragon's Elite
-
- 1,131 posts
Trigger-happy Mod
Reputation: 0
Neutral
Posted 08 August 2007 - 03:19 AM
Did you click "Windows Binary"? Did you unzip it?i tried downloading the emulator from where it sais in step 1 but it doesnt open at all...so you know anywhere else i can download it from?
Thanks Lexus!
#354
ZeroUrashima
-
- Active Member
-
- 60 posts
Hatchling
Reputation: 0
Neutral
Posted 10 August 2007 - 10:22 PM
Is there a way to make this emulator recognize the number pad on the right as numbers for controls?I'm used to using:A-3B-0X-5Y-1Back in the SNES emulators but this doesn't work for this one =(
#355
atomicknight
-
- Administrator
-
- 4,621 posts
<b><i>Target Acquired</i></b>
Reputation: 1
Neutral
Posted 11 August 2007 - 05:11 AM
Did you re-map the keys?
Thanks to -King Đedede- for the signature!
Presents from: [Hyper] [ling999rp] [Falconer] [Reaper17]
----------------------------------------------------------------------------------------------
How to use VBA and VBALink (GBA) Emulation FAQ (GBA) Emulation Guide (GBA) How to fix your roms (GBA)
How to use Gameshark codes in Pokémon R/S/E/FR/LG (GBA) How to recover bad Pokemon saves (GBA)
----------------------------------------------------------------------------------------------
Win money & prizes!
Referral links: Swagbucks Moola | Non-referral links: Swagbucks Moola
#356
Guest_king_amongthepigs
Guest_king_amongthepigs
-
- Guest
Posted 12 August 2007 - 08:31 AM
thank you so much that really help,a lot.
#357
Guest_dragonriders
Guest_dragonriders
-
- Guest
Posted 14 August 2007 - 11:09 PM
HelloIM playing NDS rom call Mage Knight Destiny Soldiers.But when i go play it The graphics isn't so great.Isn't there anything i can do to fix it the graphics are like black and white some places.And is like old gba graph i doesn't see anything just keep bad graph only see the peoples.I need somthing to fix it or somthing need so help.Thank You To See My Conversation.Good Bye 
.
.
#358
Guest_hinoatashi
Guest_hinoatashi
-
- Guest
Posted 14 August 2007 - 11:28 PM
I'm unable to find Mage Knight under the perfectly working roms topic, so I assume that currently, that specific NDS game is unplayable with an emulator. If so, there is no fix for it and you have to either play it on a flashcart or just wait for a newer version of an emulator.
#359
Guest_dragonriders
Guest_dragonriders
-
- Guest
Posted 15 August 2007 - 03:41 AM
Can any NDS specialist Tell me what is the problem.if there is no other things i can do i just ill stick playing on gba than.Just tell me a good NDS emu a better 1 or a new version.Thank YouI'm unable to find Mage Knight under the perfectly working roms topic, so I assume that currently, that specific NDS game is unplayable with an emulator. If so, there is no fix for it and you have to either play it on a flashcart or just wait for a newer version of an emulator.
.
#360
phoenix121
-
- Dragon's Elite
-
- 1,131 posts
Trigger-happy Mod
Reputation: 0
Neutral
Posted 15 August 2007 - 05:47 AM
No$gba has the best emulation speed (normal speed most of the time), but the graphics are a bit bright. You have to manually set the save type to EEPROM 64KBytes.The game also works on iDeaS, which lags a bit but the brightness is at a normal level.If you use DeSmuME, you won't be able to see any of the characters, and it lags a lot.Can any NDS specialist Tell me what is the problem.if there is no other things i can do i just ill stick playing on gba than.Just tell me a good NDS emu a better 1 or a new version.Thank You
Thanks Lexus!
#361
Guest_edyops
Guest_edyops
-
- Guest
Posted 16 August 2007 - 02:20 PM
I read that post but it still doesn't solve my problem. Every time i try playing the game, it goes as far as just after the 1st cinematic type u c ( Vent merging with the biometal). After that, just when it looks like you're about to start fighting for real; the game freezes up and u have to close it. How do i fix this?Q: How do I make Megaman ZX work?Read this post.
Edited by edyops, 16 August 2007 - 02:21 PM.
#362
Guest_Omega-Xis
Guest_Omega-Xis
-
- Guest
Posted 17 August 2007 - 02:00 PM
I don't think you can.I on the other hand used iDeaS to run it perfectlyI read that post but it still doesn't solve my problem. Every time i try playing the game, it goes as far as just after the 1st cinematic type u c ( Vent merging with the biometal). After that, just when it looks like you're about to start fighting for real; the game freezes up and u have to close it. How do i fix this?
#363
Guest_destinyisathand
Guest_destinyisathand
-
- Guest
Posted 18 August 2007 - 12:11 AM
Are you positive you set the save type? Because I had that exact same problem, and that went away after I set the save type.I read that post but it still doesn't solve my problem. Every time i try playing the game, it goes as far as just after the 1st cinematic type u c ( Vent merging with the biometal). After that, just when it looks like you're about to start fighting for real; the game freezes up and u have to close it. How do i fix this?
#364
Kiririn-shi
-
- Dragon's Elite
-
- 7,352 posts
Hanyaa~
Reputation: 2
Neutral
Posted 18 August 2007 - 12:32 AM
Use NeonDS, it runs this game:http://www.dgemu.com...howtopic=297828I read that post but it still doesn't solve my problem. Every time i try playing the game, it goes as far as just after the 1st cinematic type u c ( Vent merging with the biometal). After that, just when it looks like you're about to start fighting for real; the game freezes up and u have to close it. How do i fix this?
#365
Guest_edyops
Guest_edyops
-
- Guest
Posted 19 August 2007 - 12:19 AM
Yeah; i can't get it to stick to the save type but i change it every time before i start playing; the problem is still there. Sometimes u can make it pass that point but either a save state or a boss battle causes it to freeze up again ( the save state is a 50-50 thing; i can never tell if it's gonna save or crash.) I'll try the new emu. ody put up and give feedback afterwards. Thx for the help.Edit: Yeah; it works perfectly so far; no sound but i can live without that for a while; the animations run much faster as well. Thanx very much; if this emu can incorporate sound without losing on the speed; it could be the best emu. made for NDS (takes a little getting used to tho)Are you positive you set the save type? Because I had that exact same problem, and that went away after I set the save type.
Edited by edyops, 19 August 2007 - 01:28 AM.
#366
ZeroUrashima
-
- Active Member
-
- 60 posts
Hatchling
Reputation: 0
Neutral
Posted 22 August 2007 - 06:03 AM
Sorry for the late reply, I broke my cpu while cleaning the fan and I didn't have access to a pc meanwhile... Anyway, I changed the setting to A-3, B-0, X-5 and Y-1 but when I press them on the number pad on the right, nothing happens, when I press those on the left, they do what they are supposed to do. I'm not really used to have the ABXY on the left when playing so I was wondering if there was a way to make this emulator recognize the right number pad as numbers. The game I wanted to play crashes on no$gba so I had to try this one instead =/Did you re-map the keys?
#367
phoenix121
-
- Dragon's Elite
-
- 1,131 posts
Trigger-happy Mod
Reputation: 0
Neutral
Posted 22 August 2007 - 06:53 AM
Is numlock on or off? It should work if numlock is on.Sorry for the late reply, I broke my cpu while cleaning the fan and I didn't have access to a pc meanwhile... Anyway, I changed the setting to A-3, B-0, X-5 and Y-1 but when I press them on the number pad on the right, nothing happens, when I press those on the left, they do what they are supposed to do. I'm not really used to have the ABXY on the left when playing so I was wondering if there was a way to make this emulator recognize the right number pad as numbers. The game I wanted to play crashes on no$gba so I had to try this one instead =/
Thanks Lexus!
#368
ZeroUrashima
-
- Active Member
-
- 60 posts
Hatchling
Reputation: 0
Neutral
Posted 22 August 2007 - 11:12 PM
Tested it again to be sure, it doesn't work when Num Lock is On (and Off too of course).
#369
Guest_CTM
Guest_CTM
-
- Guest
Posted 26 August 2007 - 08:20 PM
Just pointing out that for Linux users, if you want the latest version right away, simply download the source code and run the following commands :
tar -xvf name_of_tarball.tar.gzcd name_of_tarball/sudo ./configure; sudo make; sudo make installOn most distros that should do the trick. It'll unpack it in /usr (/usr/games and such), hence the need for sudo.
#370
Guest_Bluelightning1991
Guest_Bluelightning1991
-
- Guest
Posted 06 September 2007 - 10:13 PM
Question:How do I make downloaded saves work? i've downloaded a save from gamefaqs, a .duc file, went to the emulator, clicked on file -> import backup memory and selected the file, but nothing happens, no errors, no nothing. how do I do it? I'm trying to use a file from Gyakuten Saiban 3, but since I hate the searching parts, i wanna skip to the next trial, but nothing happens =/
Edited by Bluelightning1991, 06 September 2007 - 10:16 PM.
#371
phoenix121
-
- Dragon's Elite
-
- 1,131 posts
Trigger-happy Mod
Reputation: 0
Neutral
Posted 07 September 2007 - 05:47 AM
http://www.shunyweb.info/index.phpChoose R4 as output format.Question:How do I make downloaded saves work? i've downloaded a save from gamefaqs, a .duc file, went to the emulator, clicked on file -> import backup memory and selected the file, but nothing happens, no errors, no nothing. how do I do it? I'm trying to use a file from Gyakuten Saiban 3, but since I hate the searching parts, i wanna skip to the next trial, but nothing happens =/
Thanks Lexus!
#372
Guest_Bluelightning1991
Guest_Bluelightning1991
-
- Guest
Posted 07 September 2007 - 12:12 PM
"Save was not successfully imported"
#373
phoenix121
-
- Dragon's Elite
-
- 1,131 posts
Trigger-happy Mod
Reputation: 0
Neutral
Posted 07 September 2007 - 11:25 PM
You don't need to import the save. Once you convert it, replace your old save file with the new one. Make sure you back up your old one first though.
Thanks Lexus!
#374
Guest_azn_mui_mui
Guest_azn_mui_mui
-
- Guest
Posted 09 September 2007 - 02:36 AM
im using DeSmuME emulator but its so slow =/ is everyones emulator like this? or is it just mine?im trying to load Worms 2 open warfare and Rune factory - a fantasy harvest moon but both doesnt work... does anyone know wats happening? 
#375
phoenix121
-
- Dragon's Elite
-
- 1,131 posts
Trigger-happy Mod
Reputation: 0
Neutral
Posted 09 September 2007 - 04:36 AM
It's slow for everyone. If a game doesn't work, then it isn't compatible. Try a different emulator, like No$gba:http://www.dgemu.com...howtopic=173753
Thanks Lexus!
