EDIT: When I try and place the ROM onto the AP Patcher, what I assume is an error - it reads 'TEXT' and then a bunch of japanese characters.
EDIT2: http://imgur.com/CScKQ
That's the error.
Edited by Ahwaggy, 27 October 2012 - 08:50 PM.
Pokemon Black 2 and White 2 Rom (US)
Started by Chiri Kitsu, Oct 07 2012 09:40 PM
541 replies to this topic
#226
Guest_Ahwaggy
Guest_Ahwaggy
-
- Guest
Posted 27 October 2012 - 08:39 PM
Hey - I'm kinda new to using Roms, I bought an M3 DS Simply a while ago, and only recently have I picked it up. I wanted to start playing pokemon again, so I looked for a rom and found this. I downloaded the rom, opened it with WinRAR, then downloaded the AP patcher and did as the instructions say - I extracted them into a folder, and dragged the ROM onto the .exe. I then put the rom onto my M3 card, but when I try to launch it, there's only a white screen. The card also doesnt seem to recognise that it is a game - in the game selection menu, it comes up as 'Untitled'
EDIT: When I try and place the ROM onto the AP Patcher, what I assume is an error - it reads 'TEXT' and then a bunch of japanese characters.
EDIT2: http://imgur.com/CScKQ
That's the error.
EDIT: When I try and place the ROM onto the AP Patcher, what I assume is an error - it reads 'TEXT' and then a bunch of japanese characters.
EDIT2: http://imgur.com/CScKQ
That's the error.
#227
Guest_shakaraja
Guest_shakaraja
-
- Guest
Posted 28 October 2012 - 09:17 AM
The first post in this thread states that it works on the R4i Gold 3DS, but i have one and it doesn't.
I downloaded the newest kernel (1.63b from the creators site: www.r4i-gold.eu) and downloaded the AP patched pokemon white 2.
But when i start the ROM it gives an errorcode: load rom errcode=-4 Please reset the system.
And i honestly don't have a clue how to fix it, any one else have this problem? Because i really want to play this game
My specs are:
Nintendo 3DS white v. 4.4.0-10E
R4i-Gold 3DS eu kernel 1.63b and newest core for the R4i card to support v 4.4.0
Pokemon white 2 rom (Pokemon White 2 (U) (AP Patched).nds)
Thanks in advance,
S.
I downloaded the newest kernel (1.63b from the creators site: www.r4i-gold.eu) and downloaded the AP patched pokemon white 2.
But when i start the ROM it gives an errorcode: load rom errcode=-4 Please reset the system.
And i honestly don't have a clue how to fix it, any one else have this problem? Because i really want to play this game
My specs are:
Nintendo 3DS white v. 4.4.0-10E
R4i-Gold 3DS eu kernel 1.63b and newest core for the R4i card to support v 4.4.0
Pokemon white 2 rom (Pokemon White 2 (U) (AP Patched).nds)
Thanks in advance,
S.
#228
RainThunder
-
- Validating
-
- 1 posts
Egg
Reputation: 0
Neutral
Posted 28 October 2012 - 12:20 PM
That kernel does not support Pokemon Black 2 or White 2 (U), only supports Japanese version. You have to wait until they release a new kernel version, or you can use this kernel with RetroGameFan YSMenu Updates.
P/S: R4i Gold 3DS mentioned on the first post is r4ids.cn, which supports WoodR4 1.53
P/S: R4i Gold 3DS mentioned on the first post is r4ids.cn, which supports WoodR4 1.53
Edited by RainThunder, 28 October 2012 - 12:22 PM.
#229
Guest_ineedhelponthis
Guest_ineedhelponthis
-
- Guest
Posted 28 October 2012 - 02:33 PM
I need help!
I have downloaded the first link for Pokemon Black 2 (the one that says its what I want to use to play) and the AP Patcher. I've extracted the executable file and text from the AP Patcher download into the same folder, and now I'm trying to drag the ROM into the executable, but it's not working for me! Am I missing something?
A window called "OpenPach" opens, it has a red cross meaning there was an error! What am I supposed to do?
Reply ASAP please!
P.S. I have the same error as Ahwaggy, so... now what?
http://imgur.com/CScKQ
EDIT: Cancel that, I figured out what to do. When that happens (with the error), the ROM changes name, and it gets (AP Patched). After that, just start the game normally (double click the ROM), add the codes and follow the steps that are on top of this page (added by modnar) and the game should work ujst fine!
Thank you for the great game!
I have downloaded the first link for Pokemon Black 2 (the one that says its what I want to use to play) and the AP Patcher. I've extracted the executable file and text from the AP Patcher download into the same folder, and now I'm trying to drag the ROM into the executable, but it's not working for me! Am I missing something?
A window called "OpenPach" opens, it has a red cross meaning there was an error! What am I supposed to do?
Reply ASAP please!
P.S. I have the same error as Ahwaggy, so... now what?
http://imgur.com/CScKQ
EDIT: Cancel that, I figured out what to do. When that happens (with the error), the ROM changes name, and it gets (AP Patched). After that, just start the game normally (double click the ROM), add the codes and follow the steps that are on top of this page (added by modnar) and the game should work ujst fine!
Thank you for the great game!
Edited by ineedhelponthis, 28 October 2012 - 04:58 PM.
#230
Guest_AtiNaqvi786
Guest_AtiNaqvi786
-
- Guest
Posted 28 October 2012 - 04:10 PM
I Can CONFIRM That Pokemon Black 2 and White 2 Do indeed WORK With R4i-Gold! I Have Wood 1.51 with Latest Firmware so after you have them 2 things, The Rom works Perfectly Fine With no Problems! 
Thanks!
- Pokemon black 2 and White 2 Work with R4i Gold with Latest firmware available from Website and Wood 1.50 or above! I have 1.51 and it works perfect!
Thanks!
Thanks!
Pokemon Black 2 and White 2 (US Release)
Heya guys,
Today marks the day of the release of this long awaited game! So this will be the official support thread for the new roms~
In order to extract the roms, please use 7-zip or WinRAR. The compressed rom file format is 7z.
Rom file size: 512MB decompressed.
Password for all archives: dgemu_pokemaster
- Download links to the AP pre-patched roms released (this is what you want to play the game) -
Pokemon Black 2http://www.multiupload.nl/6KJ3MZJUXFPokemon White 2http://depositfiles.com/files/el37tn6pl
- Download links to the original clean roms released respectively by Mawile (Black) and iRiL (White) -
Pokemon Black 2http://www.multiupload.nl/ZYYKPKXCN4Pokemon White 2http://depositfiles.com/files/8w3lex7kg
- Download link to the AP Patcher -http://depositfiles.com/files/klyl38vgv
Note: The AP Patcher is in Japanese. Simply extract the executable and text file into the same folder, then drag and drop your rom onto the executable. Click on "Yes", then click on "Ok". The rom will then be patched and a backup file created.
- Test Results -
Emulator:
DeSmuMe 0.9.8: Working
No$GBA 2.6 (Not 2.6a): Working (Look below for cheat codes to enable) (Thanks R0CK)
No zoomer (Thanks mr.chya)Spoiler
With no$zoomer ex5 to bypass start screen (Thanks mr.chya and Channel28)Spoiler
Flash Cart:
Acekard2i: Working. (Thanks Channel28)
CycloDS: Working. (Thanks Ferig)
DSTT: Working. (Thanks Channel28 and OnceUponATime13)
M3 DS Real: Working. (1.49 Sakura on Wood R4 M3) (Thanks Zero23)
R4 Wood: Working. (Wood 1.49) (Thanks Shonen-)
R4i Gold: n/a
R4i Gold 3DS: Working. (Thanks Channel28)
R4SDHC: Working. (Thanks Channel28)
R4i SDHC: Not Working.
R4i 3DS: Working. (TTMenu 6.88) (Thanks legojoe1 and chclony)
Supercard DSOne SDHC: Testing...
Supercard DSTWO: Working. (Firmware 1.18, EOS 1.11 with latest patch) (Thanks Channel28 and sholum)
If you guys run tests, let me know in this thread so I can update this post.
Any detailed information that is useful to the community shall be properly rewarded.
- Wi-Fi Events -
List of Wi-Fi events over at Serebii: http://www.serebii.n...ifievents.shtml
- (Expiry date: November 12th 2012) Don't forget to claim your Genesect!
- (Expired) Claim a Keldeo in the original games, then transfer it to the new game to unlock its resolute form!
- DLC -
List of downloadable content over at Serebii: http://www.serebii.n...downloads.shtml
What are the downloadable content you may ask? Those are usually C-Gear and Pokédex skins! There's also musical repertoire to get! To access all of these downloadable content, you must have an account on Pokemon Global Link here: http://en.pokemon-gl.com/
- (Expiry date: January 17th 2013) Keldeo Resolute Form C-Gear skin: Click on Promotions, find the event, and type this password to unlock: KELDEOCGEARBW2
- (Ongoing) Munna Meadow C-Gear skin: Just access the site to unlock.
Claim Wi-Fi Events on emulators
Here's a guide provided by Romulation on how to setup a local network as an emulated network for your emulator's Wi-Fi. (Thanks Shonen- for sharing this piece of information)
http://forum.romulat...p?topic=54397.0
Synching your Pokemon game to the Pokemon Global Link
- Make sure that your wireless is enabled.
- After passing the title screen, choose "Game Syn Settings" in the main menu. This will connect you to Nintendo WFC.
- Once it prompts you to create data to play Game Sync, choose Yes. Wait a few moments until the data creation is complete.
- Once you receive your Game Sync ID, go to Pokemon Global Link on your computer: http://en.pokemon-gl.com/
- Login to your account, and then click on "Add Game Card"
- Enter your Game Sync ID into the box and click on "Register"
- Accept the registration and you're done!
Note: If you registered more than 1 game, you must "swtich your game card" with the proper game version in order to get the promotions.
- Pokesav for Gen V -
Courtesy of Pokestation: http://pokestation.n...-pokesav/gen-5/
Thanks, and enjoy~
~Meru Meru
- Pokemon black 2 and White 2 Work with R4i Gold with Latest firmware available from Website and Wood 1.50 or above! I have 1.51 and it works perfect!
Thanks!
#231
Learii
-
- Member
-
- 10 posts
Egg
Reputation: 0
Neutral
Posted 28 October 2012 - 05:27 PM
so i can't get 9999 money or rematch trainers?What he means is:
You do not have to enter a Game ID to make the code(s) work.
Also you do not have to use the code(s) if you are using DeSmuME.
Just download the pre-patched rom of Pokemon Black and/or White 2 from the first page of this thread then open the rom in DeSmuME and it will work.
oh btw i have 1 question can i transfer my data from white 2 to black 2?
Edited by Learii, 28 October 2012 - 05:32 PM.
#232
mr.chya
-
- Dragon's Guard
-
- 229 posts
Serpent
Reputation: 106
Excellent
Posted 28 October 2012 - 07:35 PM
he means you don't have to use the AP code found in this thread that are specifically for use with no$gba. As for using cheat code on DeSmuMe I copied these instruction straight from the user's guide
Go to Emulation -> Cheats -> List. Select "Action Replay" for AR codes, and then just key them in and Add them. Once you are done remember to Save them. If you get an error about not being able to save your cheats, check Config -> Path Settings -> Cheats, and change it to a folder in your Documents that exists and is not read-only.
As to you're second question. If you are asking if you can transfer the white 2 save file to black to then I don't think it would work.
Go to Emulation -> Cheats -> List. Select "Action Replay" for AR codes, and then just key them in and Add them. Once you are done remember to Save them. If you get an error about not being able to save your cheats, check Config -> Path Settings -> Cheats, and change it to a folder in your Documents that exists and is not read-only.
As to you're second question. If you are asking if you can transfer the white 2 save file to black to then I don't think it would work.
#233
Guest_DeliriousNevets
Guest_DeliriousNevets
-
- Guest
Posted 28 October 2012 - 08:21 PM
Hey, I just joined this site to say thank you for the roms as well as to say The White AP patched version starts up on my Acekard 2i on my DSiXL running 1.4.3u version with 1.8.9 Akaoi (not 1.9.0). Everything seems fine so far. I've only tested the first fight so this is a far as I've gone at the moment. My Pokemon gained EXP, I saved the game then turned off my DSi, turned it back on, loaded the game again and my save was still there intact. So it seems to be just fine so far.
#234
Learii
-
- Member
-
- 10 posts
Egg
Reputation: 0
Neutral
Posted 29 October 2012 - 12:58 AM
the code is on the first post right? but how you know how many you need for 1 code? i mean there so many likehe means you don't have to use the AP code found in this thread that are specifically for use with no$gba. As for using cheat code on DeSmuMe I copied these instruction straight from the user's guide
Go to Emulation -> Cheats -> List. Select "Action Replay" for AR codes, and then just key them in and Add them. Once you are done remember to Save them. If you get an error about not being able to save your cheats, check Config -> Path Settings -> Cheats, and change it to a folder in your Documents that exists and is not read-only.
As to you're second question. If you are asking if you can transfer the white 2 save file to black to then I don't think it would work.
52180A14 43082020
22180A14 00000010
D0000000 00000000
52004EA0 E8BD01F0
02004EA0 EAFFF25C
E2001800 0000005C
E92D4008 E3A00000
E3A0150E E2811A06
E5810B44 EA5FE9F2
E59F4034 E59F5034
E5845000 E59F4020
E5945000 E59F601C
E1550006 03A05001
52180A14 43082020
22180A14 00000010
D0000000 00000000
52004EA0 E8BD01F0
02004EA0 EAFFF25C
E2001800 0000005C
E92D4008 E3A00000
E3A0150E E2811A06
E5810B44 EA5FE9F2
E59F4034 E59F5034
E5845000 E59F4020
E5945000 E59F601C
E1550006 03A05001
so how many you need for 1 and how you know what the code is for? like max money or other stuff
oh can i fast forward the game like in SNES emulator? because when i hold fast forward for desmume the game didn't fast enough caan i make it faster?
Edited by Learii, 29 October 2012 - 01:00 AM.
#235
mr.chya
-
- Dragon's Guard
-
- 229 posts
Serpent
Reputation: 106
Excellent
Posted 29 October 2012 - 01:08 AM
That hole thing is one single code and it is just an AP code that allows you to play it on no$gba. If you want cheat codes for other things like infinite money or the like you will have to find them elsewhere. As to how to make DeSmuMe faster you will need someone else who uses that emulator to help you.
#236
Learii
-
- Member
-
- 10 posts
Egg
Reputation: 0
Neutral
Posted 29 October 2012 - 01:32 AM
thx for replyThat hole thing is one single code and it is just an AP code that allows you to play it on no$gba. If you want cheat codes for other things like infinite money or the like you will have to find them elsewhere. As to how to make DeSmuMe faster you will need someone else who uses that emulator to help you.
#237
Ascension
-
- Active Member
-
- 86 posts
Beyond the Realms of Misery
Reputation: -100
Abysmal
Posted 29 October 2012 - 01:20 PM
Just downloaded everything, unextracting things soon, just wondering about the Pokesav Files, shows me a blank page I can't access e.e
How to fix? p.p
How to fix? p.p
I, the sun ov man / The offspring ov the stellar race / My halo: fallen and crushed upon the earth, that I may bring balance to this world
#238
sai_kanzen
-
- Active Member
-
- 3 posts
Egg
Reputation: 0
Neutral
Posted 29 October 2012 - 08:56 PM
Updated the firmware for my R4i-SDHC. The game now starts but after the Gamefreak logo, it's all black with the music just going on. Tried pressing everything but nothing works.
#239
Guest_Magicks
Guest_Magicks
-
- Guest
Posted 30 October 2012 - 02:38 AM
Made an account just to say I LOVE YOU. IT WORKS PERFECTLY.
Btw, I can confirm it works for R4i SDHC. Download 1.63b Kernal, format your SDHC, and I can run it without TTDS Menu. At first it froze, but I turned off DWA and Soft reset and it works wonderfully!
Btw, I can confirm it works for R4i SDHC. Download 1.63b Kernal, format your SDHC, and I can run it without TTDS Menu. At first it froze, but I turned off DWA and Soft reset and it works wonderfully!
#240
Guest_Raikkonen94
Guest_Raikkonen94
-
- Guest
Posted 30 October 2012 - 07:43 AM
Does anyone know if there is also a European version of this game around the internet.. I've searched a lot but still without any result..
#241
Guest_linklink2003
Guest_linklink2003
-
- Guest
Posted 30 October 2012 - 01:18 PM
I've been playing the rom for awhile now on DeSmuME and its been working great, but I've run into an issue where I cannot withdraw my pokemon or view their status from the box, when I try to withdraw them the sound starts to skip and the emulator pauses and will not resume, and when I try to view their status the screen goes black and the emulator pauses and will not resume, does anyone know anything that might help with this?
#242
Guest_AngelAzur
Guest_AngelAzur
-
- Guest
Posted 30 October 2012 - 07:24 PM
The download links (deposite file, putlocker, etc) links for pokemon black are not working for me, I am getting a blank page on firefox and on chrome it says oops the links appear to be broken, White works fine though and I want to give lots of love to xxmodnarxx, for the no$zoomer fix, followed every direction and works beautifully ♥ I was about to give up I tried desmu but it was running slow for me. Anywho Thanks ♥
Quick question(s) though, first question is about the cheats, I closed no$zoomer and opened it up and it looks like I had to reactivate the cheat, is there a way so that I dont have to keep doing that and restarting the rom?And second is about saving, before I closed no$zoomer, I saved using the file save state, but after I went to load( and activate the chat again) my save file didnt seem to work and it basically had me start over how can I fix that?
Quick question(s) though, first question is about the cheats, I closed no$zoomer and opened it up and it looks like I had to reactivate the cheat, is there a way so that I dont have to keep doing that and restarting the rom?And second is about saving, before I closed no$zoomer, I saved using the file save state, but after I went to load( and activate the chat again) my save file didnt seem to work and it basically had me start over how can I fix that?
#243
mr.chya
-
- Dragon's Guard
-
- 229 posts
Serpent
Reputation: 106
Excellent
Posted 30 October 2012 - 07:39 PM
As to your first question I will have to look into it. For the second one are you using the in game save or a save state, no$gba dose not support save state even though the option exists when using nozoomer. If it's the in game save that is disappearing than did you download the clean rom, If so you are encountering the AP and you need to download the patcher on the first page and patch the rom.
#244
Guest_AngelAzur
Guest_AngelAzur
-
- Guest
Posted 30 October 2012 - 07:54 PM
Okay so I retried things and I can save in game and it works fine so far, but I still have to activate cheats when I start no$zoomer.
#245
Ascension
-
- Active Member
-
- 86 posts
Beyond the Realms of Misery
Reputation: -100
Abysmal
Posted 30 October 2012 - 07:56 PM
Still waiting for someone to elaborate on how to access the Pokesav Files :/
Someone help me please? p_p
Someone help me please? p_p
I, the sun ov man / The offspring ov the stellar race / My halo: fallen and crushed upon the earth, that I may bring balance to this world
#246
mr.chya
-
- Dragon's Guard
-
- 229 posts
Serpent
Reputation: 106
Excellent
Posted 30 October 2012 - 08:04 PM
If you're talking about the link on the first page that was to a website which has expired, so unless someone here already got it from there and re-ups it here you will have to try to find it elsewhere.
#247
Guest_anrp
Guest_anrp
-
- Guest
Posted 31 October 2012 - 10:56 AM
But im still having the same problem!! I'm using No$gba 2.6 and NOT 2.6a, but everytime i quit the pokemon tab menu after using an item, it hangs in a black screen!!Nevermind i found out the solution... Download No$gba v2.6 (NOT 2.6a) and its fully working with /without no$zoomer (not even have to do that ex5) and not crashing till now
nogba v2.6 ;- http://nocash.emubas...de/no$gba-w.zip
Sakamoto-san awarded 500GPs for this post.
#248
Guest_Kelvinator
Guest_Kelvinator
-
- Guest
Posted 31 October 2012 - 09:50 PM
Hi. I have been trying to get Black 2 to work on R4SDHC (could be a clone) but to no avail, even though it is one of the confirmed ones on the first post. I have tried both the prepatched version and manually patching it myself but I still get white screen when I try to load the game. I am using kernal version 1.34 downloaded from this website: http://www.r4sdhc.com/down.asp . The kernal works fine for other games I have.
#249
mr.chya
-
- Dragon's Guard
-
- 229 posts
Serpent
Reputation: 106
Excellent
Posted 31 October 2012 - 11:08 PM
But im still having the same problem!! I'm using No$gba 2.6 and NOT 2.6a, but everytime i quit the pokemon tab menu after using an item, it hangs in a black screen!!
right try using the 2 bios files and the firmware file which can be found here
http://www.dgemu.com...s/#entry4834494
just scroll down to the emulator download section and click the link for no$gba 2.6a it contains no$zoomer, no$gba 2.6a and the bios/firmware files.
#250
Guest_SPARTAN VI
Guest_SPARTAN VI
-
- Guest
Posted 01 November 2012 - 08:03 AM
Confirmed working with the R4Ultra SDHC, with the AKAIO 1.8.1 kernel.
Confirmed working with the M3 Simply, with the AKAIO 1.9.0 kernel (IIRC).
Does NOT work with SuperCard Rumble (slot 2), with v1.8.5 kernel. Can't even get the game successfully go through the supercard DSQ converter.
It's possible you have the "R4Ultra" SDHC, which is a clone. My cart says "R4 SDHC," but on the bottom there's a url that says "www.r4ultra.com." What worked for me is the AKAIO v1.8.1 Kernel.
Confirmed working with the M3 Simply, with the AKAIO 1.9.0 kernel (IIRC).
Does NOT work with SuperCard Rumble (slot 2), with v1.8.5 kernel. Can't even get the game successfully go through the supercard DSQ converter.
Hi. I have been trying to get Black 2 to work on R4SDHC (could be a clone) but to no avail, even though it is one of the confirmed ones on the first post. I have tried both the prepatched version and manually patching it myself but I still get white screen when I try to load the game. I am using kernal version 1.34 downloaded from this website: http://www.r4sdhc.com/down.asp . The kernal works fine for other games I have.
It's possible you have the "R4Ultra" SDHC, which is a clone. My cart says "R4 SDHC," but on the bottom there's a url that says "www.r4ultra.com." What worked for me is the AKAIO v1.8.1 Kernel.
- Format your SD card with the Panasonic SD Formatter (Full erase, size adjustment on).
- Install AKAIO, then load the SD card with your game files. I'm using the BW2 AP pre-patched rom.
- Load your cart on your NDS, go to "Start" > "System Options," then disable "Bypass AntiPiracy" and "Soft-Reset."
- Enjoy!
Edited by SPARTAN VI, 01 November 2012 - 08:58 AM.
