Right try looking at the DeSmuMe user guide here
http://www.dgemu.com...-guide-and-faq/
and following the instructions on using the bios and firmware files.
If the link in the guide to the bios and firmware files are down try downloading no$gba 2.6a from the emulator download section found here
http://www.dgemu.com...s/#entry4834494
and taking the files from there.
Pokemon Black 2 and White 2 Rom (US)
Started by Chiri Kitsu, Oct 07 2012 09:40 PM
541 replies to this topic
#276
mr.chya
-
- Dragon's Guard
-
- 229 posts
Serpent
Reputation: 106
Excellent
Posted 03 November 2012 - 10:13 PM
#277
Guest_domdiogo
Guest_domdiogo
-
- Guest
Posted 03 November 2012 - 10:30 PM
thanks a lot, sorry for the inconvenience.
#278
Guest_FriedMeat
Guest_FriedMeat
-
- Guest
Posted 04 November 2012 - 12:18 AM
My Black 2 and White 2 freeze after the first fight in the Pokemon World Tournament. I'm using the SuperCard DSTWO. It happened on White 2 so I thought it was just the rom. Does the same thing on Black 2. Any help? I would like to somehow keep my saves if at all possible because I've no life'd them for the past week >.>
#279
Guest_xxmodnarxx
Guest_xxmodnarxx
-
- Guest
Posted 04 November 2012 - 01:08 AM
My Black 2 and White 2 freeze after the first fight in the Pokemon World Tournament. I'm using the SuperCard DSTWO. It happened on White 2 so I thought it was just the rom. Does the same thing on Black 2. Any help? I would like to somehow keep my saves if at all possible because I've no life'd them for the past week >.>
Man. My memory is bad. Try:
- Before you start your rom press X and put the patched rom into clean mode then try it.
- Or download the DeSmuME emulator for PC and move your save file for whatever rom you want over to your PC and transfer the save file to DeSmuME using the option it has then get past that point using DeSmuME then save it and rename the file extension to match your SCDS2 (".sav" I think) then move the save file back to the SCDS2.
#280
Guest_FriedMeat
Guest_FriedMeat
-
- Guest
Posted 04 November 2012 - 01:12 AM
I'm not entirely sure on how to transfer my save from my supercard to Desmume. I save in the rom itself, not using the real time supercard save feature because my L button is basically broken.Man. My memory is bad. Try:
- Before you start your rom press X and put the patched rom into clean mode then try it.
- Or download the DeSmuME emulator for PC and move your save file for whatever rom you want over to your PC and transfer the save file to DeSmuME using the option it has then get past that point using DeSmuME then save it and rename the file extension to match your SCDS2 (".sav" I think) then move the save file back to the SCDS2.
EDIT: It worked. THank YOU SO MUCH. VIRTUAL HUG.
Edited by FriedMeat, 04 November 2012 - 01:14 AM.
#281
Ascension
-
- Active Member
-
- 86 posts
Beyond the Realms of Misery
Reputation: -100
Abysmal
Posted 04 November 2012 - 01:18 AM
DeSmuMe should support both type of files, .sav files and .rom files (remember to re-name your .sav file name to the proper .rom file name).
I, the sun ov man / The offspring ov the stellar race / My halo: fallen and crushed upon the earth, that I may bring balance to this world
#282
Guest_jackegg
Guest_jackegg
-
- Guest
Posted 04 November 2012 - 06:41 AM
I'm sure a detailed report including screenshots would have been better than just yelling HELP!!!, I'm quite sure we can help you if you provide us those screenshots and (optionally) any error codes provided by the emulator.
here's the problem, as you can see, the game freezed right after i withdraw the pokemon.
Edited by jackegg, 04 November 2012 - 06:44 AM.
#283
mr.chya
-
- Dragon's Guard
-
- 229 posts
Serpent
Reputation: 106
Excellent
Posted 04 November 2012 - 06:50 AM
here's the problem, as you can see, the game freezed right after i withdraw the pokemon.
I'm to tired to type this out again right now so I just quoted my self
Right try looking at the DeSmuMe user guide here
http://www.dgemu.com...-guide-and-faq/
and following the instructions on using the bios and firmware files.
If the link in the guide to the bios and firmware files are down try downloading no$gba 2.6a from the emulator download section found here
http://www.dgemu.com...s/#entry4834494
and taking the files from there.
Edited by mr.chya, 04 November 2012 - 08:55 AM.
#284
Guest_Voidaken
Guest_Voidaken
-
- Guest
Posted 04 November 2012 - 08:38 AM
Alright, so this isn't working for me. I swear I've done everything right, but it just won't happen. I've also gone through every post in this thread to make sure if there was a solution for my problem or similar; alas, I did not see one. I'm going to give all the information I can here.
I am using the R4i Gold 3DS flashcart. It's using a MicroSD 8 GB card made by Samsung. I'm using the 3DS(of course). I have downloaded the Wood R4 kernel version 1.54 and extracted the _rpg folder, _DS_MENU.DAT, and WOODR4.NDS files to the root of the card. I have upgraded the software to patch version 44(that's what the file called it, but I think it's more like 1.44 or however they do it). I've downloaded the ROMS from your links which work fine on Desmume. When I try to play the files on my flashcart, it goes to the loading screen, the text turns red, and then it will not proceed to the game. I do not know what I am doing wrong, and I am now at the point of frustration and seeking help from others.
Thank you in advance for all you can do for me as well as the files and help you've offered already.
I am using the R4i Gold 3DS flashcart. It's using a MicroSD 8 GB card made by Samsung. I'm using the 3DS(of course). I have downloaded the Wood R4 kernel version 1.54 and extracted the _rpg folder, _DS_MENU.DAT, and WOODR4.NDS files to the root of the card. I have upgraded the software to patch version 44(that's what the file called it, but I think it's more like 1.44 or however they do it). I've downloaded the ROMS from your links which work fine on Desmume. When I try to play the files on my flashcart, it goes to the loading screen, the text turns red, and then it will not proceed to the game. I do not know what I am doing wrong, and I am now at the point of frustration and seeking help from others.
Thank you in advance for all you can do for me as well as the files and help you've offered already.
#285
Guest_jackegg
Guest_jackegg
-
- Guest
Posted 04 November 2012 - 08:42 AM
done everything, still same freezing problem;(I'm to tired to tyoe this out again right now so I just quoted my self
#286
Guest_speculiar
Guest_speculiar
-
- Guest
Posted 05 November 2012 - 12:36 PM
R4i SDHC works with (on their site) WOOD R4i V1.51
NOTE: R4i-SDHC and R4i SDHC appear to be two different cards, with two different manufacturers and therefor both cards have different kernels.
EDIT: Jackegg: Remember that Pokemon black 2 and White 2 are just released. It will take a little while to make them fully compatible.
NOTE: R4i-SDHC and R4i SDHC appear to be two different cards, with two different manufacturers and therefor both cards have different kernels.
EDIT: Jackegg: Remember that Pokemon black 2 and White 2 are just released. It will take a little while to make them fully compatible.
Edited by speculiar, 05 November 2012 - 12:39 PM.
#287
Guest_pathcrowler
Guest_pathcrowler
-
- Guest
Posted 05 November 2012 - 01:54 PM
r4i-sdhc isnt working :< errcode=-4 am i doing something wrong or what? :/
note: i have the latest update which is v1.11d
note: i have the latest update which is v1.11d
Edited by pathcrowler, 05 November 2012 - 03:00 PM.
#288
Guest_speculiar
Guest_speculiar
-
- Guest
Posted 05 November 2012 - 03:06 PM
r4i-sdhc isnt working :< errcode=-4 am i doing something wrong or what? :/
note: i have the latest update which is v1.11d
This can be true. As I said I have tested the R4i SDHC and NOT the R4i-SDHC (Note the dash (Yes that actually does matter as there are two different manufacturers))
Wait for an update for the R4i-SDHC. Perhaps it will be fixed then.
#289
Guest_domdiogo
Guest_domdiogo
-
- Guest
Posted 05 November 2012 - 03:47 PM
done everything, my game is still freezing just after withdraw, what can I do?
#290
Guest_speculiar
Guest_speculiar
-
- Guest
Posted 05 November 2012 - 03:54 PM
Remember that Pokemon black 2 and White 2 are just released. It will take a little while to make them fully compatible.done everything, my game is still freezing just after withdraw, what can I do?
#291
argenfargen
-
- Member
-
- 1 posts
Egg
Reputation: 0
Neutral
Posted 07 November 2012 - 10:05 AM
I can confirm that it works for Accekard 2i on the DSi XL, both versions
#292
Guest_Mugiwara
Guest_Mugiwara
-
- Guest
Posted 09 November 2012 - 08:53 AM
Hello fellow members, I have a rather old R4 SDHC (I can only assume it's a clone) that is running Basic Firmware 1.18 and also has Wood for R4 running at 1.53 I believe. The game either loads to a complete black screen or in some instances loads to a white screen without ever changing. I changed the reset function on the wood to off (I've also tried with it on) and cannot seem to get it to work no matter what I try. If the system matters I have a DS Lite(White). For the most part my games have worked all the way up to Heart Gold in terms of Firmware so I don't know what could be wrong. Now it's kind of like a challenge just to make this game work. haha. Any help would be appreciated.
#293
Guest_zuouxarm
Guest_zuouxarm
-
- Guest
Posted 09 November 2012 - 02:15 PM
Greetings. I hope I posted my question at the right place.
First, I'd like to state that I'm not a hardcore DS user, nor am I that well-versed with all those DS/emulation/r4-related terms. Please be patience with me, and I'm sorry for this inconvenience.
I'm having a problem loading my Pokemon Black v2 rom on my DSlite, getting 'load rom errcode=-4' each time I try to load it. I understand that this might happen with recent NDS ROMs which are AP-protected, however I've tried both clean and patched rom; both getting the same error. right now, my DSlite uses:
R4i DSi LL v1.45 (blue) (cloned, i think?)
4GB microSD
DSiLL firmware (with TTmenu and YSmenu from http://forum.romulat...0&topic=43121.0 )
I've tried using Wood R4 firmware but it cannot be loaded. Maybe it's not compatible with my R4? BTW, this only happens on Pokemon Black v2; Pokemon Black v1 runs smoothly on my system without any problems so far (currently just finished N castle, obtained national dex). Can anyone suggest what should I do, so I can play pokemon black v2 on my system? Any feedback is appreciated, thanks.
Good news- I can play Black version 2 on my R4 already!
Moderator/admin can delete my previous post if required.
If anyone got the same problem as I did (on the exactly same system as I used), can try this solution:
1) Delete iLL.iL on your R4's root directory. Don't touch the rest of the original firmware files (no need for deletion, but you can make backups just in case.)
2) Download the latest R4 kernel from http://gbatemp.net/t...eleases.267243/
3) Extract the downloaded .rar file
4) Open the DSTTi-Clone TTmenu folder
5) Follow the readme.txt instructions
6) Check your R4's root directory; now there's a TTmenu.dat file (which is from the DSTTi-Clone). Rename it into iLL.iL
7) Done. Try loading your pokemon black/white version 2. I'm unsure if this'll work on all those black/white v2 roms out there. I'm using the patched black version 2 rom, and it works fine for me.
Hope this'll help.
First, I'd like to state that I'm not a hardcore DS user, nor am I that well-versed with all those DS/emulation/r4-related terms. Please be patience with me, and I'm sorry for this inconvenience.
I'm having a problem loading my Pokemon Black v2 rom on my DSlite, getting 'load rom errcode=-4' each time I try to load it. I understand that this might happen with recent NDS ROMs which are AP-protected, however I've tried both clean and patched rom; both getting the same error. right now, my DSlite uses:
R4i DSi LL v1.45 (blue) (cloned, i think?)
4GB microSD
DSiLL firmware (with TTmenu and YSmenu from http://forum.romulat...0&topic=43121.0 )
I've tried using Wood R4 firmware but it cannot be loaded. Maybe it's not compatible with my R4? BTW, this only happens on Pokemon Black v2; Pokemon Black v1 runs smoothly on my system without any problems so far (currently just finished N castle, obtained national dex). Can anyone suggest what should I do, so I can play pokemon black v2 on my system? Any feedback is appreciated, thanks.
Good news- I can play Black version 2 on my R4 already!
Moderator/admin can delete my previous post if required.
If anyone got the same problem as I did (on the exactly same system as I used), can try this solution:
1) Delete iLL.iL on your R4's root directory. Don't touch the rest of the original firmware files (no need for deletion, but you can make backups just in case.)
2) Download the latest R4 kernel from http://gbatemp.net/t...eleases.267243/
3) Extract the downloaded .rar file
4) Open the DSTTi-Clone TTmenu folder
5) Follow the readme.txt instructions
6) Check your R4's root directory; now there's a TTmenu.dat file (which is from the DSTTi-Clone). Rename it into iLL.iL
7) Done. Try loading your pokemon black/white version 2. I'm unsure if this'll work on all those black/white v2 roms out there. I'm using the patched black version 2 rom, and it works fine for me.
Hope this'll help.
Edited by zuouxarm, 09 November 2012 - 10:01 AM.
#294
Guest_juistemail
Guest_juistemail
-
- Guest
Posted 10 November 2012 - 07:49 PM
works on R4i kernel 1.56
#295
Guest_SPARTAN VI
Guest_SPARTAN VI
-
- Guest
Posted 11 November 2012 - 07:36 AM
Alright, so this isn't working for me. I swear I've done everything right, but it just won't happen. I've also gone through every post in this thread to make sure if there was a solution for my problem or similar; alas, I did not see one. I'm going to give all the information I can here.
I am using the R4i Gold 3DS flashcart. It's using a MicroSD 8 GB card made by Samsung. I'm using the 3DS(of course). I have downloaded the Wood R4 kernel version 1.54 and extracted the _rpg folder, _DS_MENU.DAT, and WOODR4.NDS files to the root of the card. I have upgraded the software to patch version 44(that's what the file called it, but I think it's more like 1.44 or however they do it). I've downloaded the ROMS from your links which work fine on Desmume. When I try to play the files on my flashcart, it goes to the loading screen, the text turns red, and then it will not proceed to the game. I do not know what I am doing wrong, and I am now at the point of frustration and seeking help from others.
Thank you in advance for all you can do for me as well as the files and help you've offered already.
Backup the files on your microSD card, format using the Panasonic SD Formatter tool, then restore your files and try again. I was mulling over this for a few hours and that's what fixed it for me.
#296
Guest_Omnituens
Guest_Omnituens
-
- Guest
Posted 11 November 2012 - 04:43 PM
I have tested both AP Patched and Clean Black 2 ROMS on my Supercard DSOne SDHC with the latest OS upgrade (which I think is SP6) and no dice - fails to load (sits on Dsone EOS loading screen.
I have tried running in both Patched and Clean modes, same result. However, I am not an expert with such things so this could be a setup error on my part. I will try a few more things. I'll keep an eye on this thread in case you guys want me to test anything. On a DS Lite, UK model.
I have tried running in both Patched and Clean modes, same result. However, I am not an expert with such things so this could be a setup error on my part. I will try a few more things. I'll keep an eye on this thread in case you guys want me to test anything. On a DS Lite, UK model.
Edited by Omnituens, 11 November 2012 - 04:54 PM.
#297
Guest_itonyvuko
Guest_itonyvuko
-
- Guest
Posted 12 November 2012 - 03:53 AM
Thanks a lot for uploading and for listing which Carts work!
#298
Guest_SPARTAN VI
Guest_SPARTAN VI
-
- Guest
Posted 13 November 2012 - 02:35 AM
Confirmed working on the original R4 with R4 Wood 1.53 kernel.
I recently got my hands on a friend's R4 and it still has the 1.18 kernel. The prepatched Black 2 rom wouldn't load, just the plain white screen like you mentioned. Upgraded its kernel to R4 Wood v1.53 and now it works like a charm.
Hello fellow members, I have a rather old R4 SDHC (I can only assume it's a clone) that is running Basic Firmware 1.18 and also has Wood for R4 running at 1.53 I believe. The game either loads to a complete black screen or in some instances loads to a white screen without ever changing. I changed the reset function on the wood to off (I've also tried with it on) and cannot seem to get it to work no matter what I try. If the system matters I have a DS Lite(White). For the most part my games have worked all the way up to Heart Gold in terms of Firmware so I don't know what could be wrong. Now it's kind of like a challenge just to make this game work. haha. Any help would be appreciated.
I recently got my hands on a friend's R4 and it still has the 1.18 kernel. The prepatched Black 2 rom wouldn't load, just the plain white screen like you mentioned. Upgraded its kernel to R4 Wood v1.53 and now it works like a charm.
Edited by SPARTAN VI, 13 November 2012 - 02:41 AM.
#299
Guest_Jwguy
Guest_Jwguy
-
- Guest
Posted 17 November 2012 - 08:00 PM
R4i 3DS still doesn't support this, natively. Shame. =(
I would try to use TTMenu, but I can never get TTMenu to load without going to a perpetual white, loading screen.
I would try to use TTMenu, but I can never get TTMenu to load without going to a perpetual white, loading screen.
#300
Guest_StirSensually
Guest_StirSensually
-
- Guest
Posted 19 November 2012 - 03:38 AM
Hey can someone help me get started?
When I start the game with no$gba 2.6 using no$zoomer it says "The saved data could not be accessed. Please turn the power off and reinsert the Game Card."
I have no idea what to do
When I start the game with no$gba 2.6 using no$zoomer it says "The saved data could not be accessed. Please turn the power off and reinsert the Game Card."
I have no idea what to do
Edited by StirSensually, 19 November 2012 - 04:35 AM.
